Knauf Airless Finish Readymix Plasters

Knauf Airless Finish is used as a direct finish coat onto smooth backgrounds such as Knauf Plasterboards, or fair faced concrete panels. Knauf Airless Finish can also be applied as a finishing coat onto Knauf Airless Backing.

Product Features

  • Ready to use, direct alternative to traditional plaster for finishing coat, no mixing required.

  • Durable spray-applied finishing plaster.

  • Provides smooth flat finish to walls and ceilings.

  • Easy to level with minimal need for sanding.

  • Extremely smooth consistency for perfect glide of finishing tools.

Application

Knauf Airless Finish is recommended for use over plasterboards, composite boards or fair faced concrete surfaces with a two coat application, onto taped and jointed drylining systems, or as a finishing coat onto Knauf Airless Backing. Knauf Airless Finish is applied 1-2mm thick prior to decoration to produce a smooth flat finish to walls and ceilings.

  

                                                             

Coverage

Up to 22m2 per 25.0kg bag at 1mm thickness.

Installation

Suitable Substrates Knauf Airless Finish is suitable as direct finish coat onto smooth backgrounds such as plasterboards or fair faced concrete.

Knauf Airless Finish is suitable for use with all plasters and jointing materials.

Application Temperature Should not be used below 5ºC or above 30ºC. Max air humidity 65% R.H

Application Type Graco Mark V TexSpray, hand or roller application. Use tip size 531-535 when spray plastering.
Application Thickness Applied as 1-2mm thick, after 2 coat application.
Drying time 12-24 hours in average, this is dependent on application thickness, temperature, ventilation, air humidity and type of substrate.
Mixing Ready-mixed product, no dilution required.
Appearance White Finish

 


 

Find your nearest Colour Centre store