Knauf Airless Finish Light Readymix Plasters

Knauf Airless Finish Light is used as a direct finish coat onto smooth backgrounds such as Knauf Plasterboards, or as a finishing coat for Knauf Airless Backing. Knauf Airless Finish Light serves as a 2 in 1 product for finishing and bedding tapes/flex tape/paper faced metal beads in drywall partitions and ceilings.

Product Features

  • Ready to use, direct alternative to traditional plaster forfinishing coat, no mixing required.

  • Knauf Airless Finish Light is a unique 2 in1 product forfinishing and bedding tapes/flex tape/paper faced metalbeads in drywall partitions and ceilings.

  • Durable spray-applied finishing plaster.

  • Gives smooth flat finish to walls and ceilings.

  • Easy to level with minimal need for sanding.

  • Extremely smooth consistency for perfect glide of finishingtools.

  • Light weight formula enables the use of airless sprayingover longer distances.

Application

Knauf Airless Finish Light is recommended for use over plasterboards, composite boards or fair faced concrete surfaces with a two coat application, or as a finishing coat
for Knauf Airless Backing. Knauf Airless Finish Light can also be used for bedding tapes/flex tape/paper faced metal beads in drywall partitions and ceilings. Knauf Airless Finish Light is applied 1-2mm thick prior to decoration to produce a smooth flat finish to walls and ceilings.

 

                                                           

Coverage

Up to 18m2 per 16.5kg bag/tub at 1mm thickness.

Installation

Knauf Airless Finish Light is suitable as direct finish coat onto smooth backgrounds such as plasterboards or fair faced concrete.

Knauf Airless Finish Light is suitable for use with all plasters and jointing materials manufactured to BS EN 13279-1:2008 and BS EN 13963:2014.

Application Temperature Should not be used below 5ºC or above 30ºC. Max air humidity 65% R.H

Application Type Graco Mark V TexSpray, hand or roller application. Use tip size 531 when spray plastering.
Application Thickness Applied as 1-2mm thick, after 2 coat application.
Drying time 12-24 hours in average, this is dependent on application thickness, temperature, ventilation, air humidity and type of substrate.
Mixing Ready-mixed product, no dilution required.
Appearance Light Grey Finish

 


 

Find your nearest Colour Centre store